The WeRestore Red Light Panel combines visible red light and near-infrared light into one easy-to-use system for daily recovery and wellness. It's designed for both half-body and full-body sessions, with flexible settings so you can tailor each session to your comfort and goals.

This guide covers setup, light modes, touchscreen controls, distance, routines, care, safety, troubleshooting, and warranty.

Red light is visible to the eye and is commonly chosen for skin-focused wellness routines and areas closer to the body's surface. People often include red light sessions as part of routines that support healthy-looking skin and overall daily wellness.

Near-infrared light is largely invisible, which means these LEDs may appear much dimmer or even look as though they are switched off during use. This is completely normal.

Near-infrared light reaches deeper tissues than visible red light and is commonly used for larger muscles, joints, and post-activity recovery routines. Many people choose near-infrared light after exercise or for areas that feel tight, over-worked, or slow to recover.

Combined Mode uses both visible red and near-infrared light at the same time. This is the setting many people choose for general daily recovery because it allows both types of light to work together during the same session.

Tip: If you're unsure which mode to choose, Combined Mode is an excellent place to begin.

Choose a session length from 1 to 30 minutes. For most people, 10–15 minutes is a comfortable starting point, and 15–20 minutes is commonly used for larger treatment areas or post-exercise recovery.

Adjust brightness anywhere between 0% and 100%. Choose the level that feels comfortable for you — you can always increase brightness over time as you become familiar with your sessions.

Your panel includes adjustable pulse frequency settings. If you're new to the panel, there's no need to adjust these straight away — the default setting is suitable for everyday use. As you become more familiar with your panel, you can explore different pulse frequencies to personalise your sessions.

One of the most common questions people ask is: "How close should I stand?"

There isn't a single correct distance. Instead, position yourself so the light comfortably covers the area you'd like to support.

The most important thing is consistency. Regular sessions over time are generally more valuable than occasionally trying to maximise every session.

The panel works most effectively when the light reaches the skin directly. Whenever practical, expose the area you want to treat. Loose or thick clothing may reduce the amount of light reaching the body. Wear whatever allows you to feel comfortable and relaxed during your session.

Protective eyewear is included with your panel. Many people choose to wear the glasses during treatment, particularly when facing the panel directly. You may also choose to close your eyes during facial sessions.

Recommended Mode: Combined | Suggested Time: 10–15 minutes

A gentle way to begin the day feeling refreshed and ready to move.

Recommended Mode: Near-Infrared or Combined | Suggested Time: 15–20 minutes

A popular routine after walking, strength training, cycling, running, or other physical activity.

Recommended Mode: Combined | Suggested Time: 10–15 minutes

Many people enjoy using their panel in the evening as part of a relaxing bedtime routine.

Choose one area that feels like it could use a little extra care. Common choices include neck and shoulders, upper back, lower back, hips, knees, calves, and feet. Spend 10–15 minutes focusing on that area before moving on with your day.

One of the easiest ways to build consistency is to attach your session to a routine that's already part of your day — while enjoying your morning coffee, after your workout or walk, during your evening reading time, while listening to a podcast, or before winding down for bed.

Some days you may feel energised and active. Other days your body may feel a little stiffer, tighter, or simply in need of extra care. Your panel doesn't need to be used exactly the same way every day. Some people enjoy a full-body session, while others prefer to focus on one area. The best routine is one that works for you and is easy to maintain.

Many people include red light therapy as part of their daily wellness routine. Regular, consistent sessions are generally easier to maintain than using the panel only occasionally.

Some people choose to use the panel more than once during the day, particularly if they are treating different areas of the body. Pay attention to how your body responds and choose a routine that feels comfortable for you.

Near-infrared light is largely invisible to the human eye. Although those LEDs may appear dim or switched off, they are still operating normally.

Protective glasses are included with your panel. Many people wear them when facing the panel directly, especially during facial sessions.

Clean, dry skin is generally the easiest way to begin your session. If you use skincare products, allow them to absorb fully before using the panel.

The light reaches exposed skin most effectively. Whenever practical, uncover the area you want to treat.

Yes. Like many electronic devices, the panel generates some warmth during operation. Its built-in cooling system is designed to help regulate the temperature throughout your session.

Everyone's experience is different. Some people enjoy simply having dedicated time each day to relax and unwind, while others notice changes over time as they continue using the panel consistently. Building a regular recovery routine is often more important than expecting immediate results.

Always switch the panel off, unplug the power cable, and allow the panel to cool if it has just been used.

Use a soft microfiber cloth to gently wipe the surface. If needed, lightly dampen the cloth with water. Avoid spraying liquids directly onto the panel. Do not use abrasive cleaners, alcohol, solvents, or harsh chemicals, as these may damage the housing or protective lens surfaces.

The rear vents allow air to circulate while the panel is operating. Check them occasionally and remove any dust using a soft, dry cloth. Keeping the vents clear helps maintain efficient cooling during longer sessions.

When the panel is not in use, store it in a clean, dry location, avoid excessive humidity, keep it away from direct heat sources, and do not place heavy objects on top of the panel. If you're transporting your panel, protect it from impacts and use the original packaging whenever possible.

Use the panel on clean, dry skin whenever possible. Remove jewellery or accessories that may become warm or interfere with the treatment area. Choose a stable, comfortable position you can maintain for the full session, and avoid leaning against the panel or placing pressure on its surface. Begin with a shorter session and a comfortable brightness level while you become familiar with the device.

Photosensitising medications may include certain antibiotics, acne treatments, diuretics, anti-inflammatory medicines, and other prescription drugs. Check the information supplied with your medication or speak with a qualified healthcare professional.

Allow your body to settle before using the panel again. Seek medical advice if symptoms continue or concern you.

The WeRestore Red Light Panel is intended to support general wellness and recovery routines. It is not intended to diagnose, treat, cure, or prevent a medical condition.

Check that the power cable is fully connected to the panel, the plug is securely inserted into the wall outlet, the rear power switch is turned on, and the wall outlet is working. Try a different suitable outlet if necessary. If the panel still does not switch on, unplug it and contact WeShape Support.

Check that a light mode has been selected, the brightness is set above 0%, a session time has been entered, and the session has been started. Remember that near-infrared LEDs are largely invisible and may appear very dim even when operating correctly.

The panel contains several wavelengths. Visible red LEDs will appear brighter to the eye than near-infrared LEDs. This difference is expected and does not necessarily indicate a fault.

Some warmth during operation is normal. Make sure the rear cooling vents are clear and that the panel has enough space around it for airflow. Switch the panel off if it becomes unusually hot, produces an unfamiliar smell, or makes an unexpected sound — then unplug it and contact WeShape Support before using it again.

Switch the panel off using the rear power switch. Unplug it for a few minutes, reconnect the power, and switch it on again. Use clean, dry hands when operating the screen.

Check the battery and make sure there is a clear line between the remote and the panel. Move closer and try again.

Stop the session and support the panel before making adjustments. Check the hooks, hanging cables, pulley system, and attachment points. Do not continue using the panel until it is stable and securely positioned.

Do not dismantle the panel or attempt an internal repair. Contact WeShape Support with your order number, the panel's serial number (if available), a brief description of the issue, and photos or a short video showing the problem. This information will help the support team assess the issue more quickly.

Your WeRestore Red Light Panel includes a 2-year limited warranty covering eligible manufacturing defects under normal household use.

Warranty support is subject to inspection and confirmation by the supplier or WeShape Support team.

Keep your proof of purchase, order confirmation, and product information in a safe place. These may be required when making a warranty claim.

For setup help, troubleshooting, replacement parts, or warranty assistance, contact the WeShape Support team through the official support channel provided with your order. Please include your order details and a clear explanation of what you are experiencing.

]]>